अवप्रेरक इसके अंग्रेजी अर्थ का उदाहरण

The reactive parts of an acoustic medium are determined by its bulk modulus and its density, analogous to respectively an electrical capacitor and an electrical inductor, and analogous to, respectively, a mechanical spring attached to a mass.

It also can be applied to an inductor or capacitor at a chosen frequency.

Where X_L is the reactance of the inductor, L is the inductance, \omega is the angular frequency and R is the resistance of the inductor.

The resistance R represents the loss in the inductor, mainly due to the resistance of the wire.

In a band pass filter using an LC resonant circuit, when the loss (resistance) of the inductor increases, its Q factor is reduced, and so the bandwidth of the filter is increased.

In a coaxial cavity filter, there are no inductors and capacitors, but the cavity has an equivalent LC model with losses (resistance) and the Q factor can be applied as well.

There is usually provision to add a calibrated amount of high Q capacitance across the component under test to allow inductors to be measured in isolation.

While the CYP3A4 inhibitor ketoconazole had no significant effect on exemestane levels in a clinical trial, the strong CYP3A4 inductor rifampicin significantly cut exemenstane levels about in half (AUC −54%, Cmax −41% for a single dose), potentially compromising its effectiveness.

Other 3A4 inductors such as carbamazepine and St John's Wort are expected to have similar effects.

In addition to transistors, analog chips often include a larger number of passive elements (capacitors, resistors, and inductors) than digital chips.

Inductors tend to be avoided because of their large size, and transistors and capacitors together can do the work of inductors.

In any electrical circuit, the number of state variables are equal to the number of storage elements, which are inductors and capacitors.

The state variable for an inductor is the current through the inductor, while that for a capacitor is the voltage across the capacitor.